Bionic Balls

me mate gets tennis elbow from riding look that up?

it held for a whole week man! wouldn't worry too much...

also likes gilles' bike most... he has cut the ends off his pedals ...i thought it looked a bit rough in real life...he has literally scratched all the paint off, with wire wool it looks like!

that was freakin' awesome! unicycle stuff especially....i can't even ride the bloody things... as above..keep goin! adam

tensioner is fine....there's not really anything to go wrong and i'v got loads of Ti in my shed for when it wears out...

loooooads of pictures! that one of andrei ( i think) hopping down those fountain things looks mint! was out with tom earlier...and he's come back from spain on some serious form... nice.

yikes...re-read your post... swiss cottage!?!i had to look up where that is as far as I know, there are no riders around that area....so i have no idea if there is any riding around there at all... usual places are around southbank, elephant & castle, the "city"/liverpool stish sometimes hackney, woolwich, lewisham, kingston.. if there's much in swiss cottage i'm sure some people would love to ride somewhere new. adam

100 x 5 with flat onza bars is pretty standard on a t-rex...

i can't get on the wiggle site once in a blue moon it works...

st pauls churchyard is always good.... check rides/locations and then you can get the tour!

got some magura ones i don't use.... well worth it i found

gi' us a lift will? slight detour..

all fixed hubs are pretty much the same nowadays....they have the same bearings! from experience, i'v found the koxx or megamo hubs to be alot more durable- needle bearing on the drive side and beefier axle. viz axles are terrible... adam

hahaha...was just reading this... you might be pleased to know..the forks died

first thing i did was to put a 3mm thick piece of steel over the mech hangar! problem was my mech used to break slowly i now have a homemade 74 kingz "style" tensioner... http://www.trials-forum.co.uk/forum/index....=105132&hl= good luck!

i'm in a pretty similar situation! i'm borrowing some monty ti bars of a mate....and i'm waiting till the end of the month when the new trialtech bars should be out...740mm wide, but with slightly less rise... extension wise...i've got some old outland bar plugs that came with some XC bars. They're basically a cylinder of Al cut diagonally with a thread through the middle. As you do up the bolt, the two halves slide past each other (on the diagonal cut) and get wedged in the bar. Just cut the end of some other bars and put over the top and you'd have a nice extension adam edit- http://www.singletrackbikes.co.uk/product/...s_Alloy_ScrewIn

see you sunday!

now that's different

looks like an awesome comp...nice pics what's happened to benito there? front too low? and does anyone know what bars gilles runs...rage?half black...half silver well done kenny!

an air horn

the french reign of terror has been broken!! in case you were wondering (from site above): kenny (5) comas (14) gilles (20) then giacomo, vincent, fontenoy

oh dear...now i kinda glad i didn't go! wanted to adam

ace vid matt...well done for going through all that footage! thrilled to be in the same vid as the cousts and vince adam

haha...yes..brakes gives me confidence...especially on natural- much more important there i reckon! so much more to go wrong most of the time... and simpson...steve's brakes are bloody mint nowadays adam

that was super fast... good riding