AkuskaUK

Sounds like a king on steroids

I'll agree with Trialsiain there... Curve v4

Giro Hex

I had a set, brilliant bars! I did recently sell them but that was due to the fact that these bars were more of an "I want" more than "I need". They have a great stiff feeling to them, and very comfortable to use.

Echo urban 2013! Amazing forks!

Mine feels solid and "snappy", send it to Hope and ask them nicely to service it? it could be a sticky piston and/or master cylinder.

What frame? Gear ratio?

Get a Hope Saw rotor, a big hill and some water

Oh my!

Ah, not a fan.

http://www.gametracker.com/server_info/173.234.233.178:2352/ TG US3480 server

That was brilliant

No , not from my knowledge. They possibly could be swapped to a 24 if the brake mounts would allow it and/or rear disc.

Yep, 184 games in the library and no life mostly DayZ!

Are there day tickets?

I did , its done well and strait!

I bought a 5mm one from tarty and used a fine grads sand paper to bring it down 1mm, try that?

Im 6'3 nearly 6'4, i run a 2012 Zoo Piranha frame with a 150x30 stem. Its a very comfortable geo!

I weigh 15.9st and i have only snapped one chain which was an Orbital, haven't snapped my KMC 610HX and I've had it since November. Im in no way a smooth rider either.

I just thought ild update this thread to say that I have fixed it! It was the plastic seal that is in the middle of the hub shell and drive body, it was cracked and torn up at the back but looked in good condition at the front (hence the overlook) Thank you to everyone that helped out!

M810 from what I've heard, I could be wrong though!

Portsmouth

Dr Stix is George, yes.

Hi all, Apon fixing a puncture today I re-installed my rear wheel into my 2012 Zoo! Piranha frame. Once the rear wheel is in and bolted securely my pro 2 is hard to pedal back. I took it apart and cleaned it / reapplied grease and it seems it have not fixed the problem, any suggestions? Thanks in advance!

I was about to ask that! What the f**k!