isitafox

Just wondered if anyone on here has used foam trials grips on their mtb and if so, how did/do you find them?

I love how having not properly looked on here for years the good old T Pro is still going strong as the go to starter/budget bike build. Looks clean

Even when I was more active on here they were like hens teeth to get hold of, does anyone still do a thick foam grip nowadays as all the thick options on Tarty seem to be out of stock?

Der Kaiser for me, immense grip

Actually managing to get out on my bike at least once a fortnight and having fun randomly exploring local trails rather than my standard loop. Jamis now got some new tyres after a year, high roller front and aggressor rear, pro 4 on the back and looking at some new bars. Need to do something with the front end as it's running 100mm qr and flexes like f**k and the current setup leaves my arms shaken to bits on long descents.

Would probably be bolting through. I've got access to a magnetic industrial drill we've used for hanging 3m high shed doors at the farm I live on so that shouldn't be a problem. Thanks for the advice!

To be a bit more descriptive here's two possibilities I mean, the first is using 2 end supports and 2 near the middle (the pink lines) and the second is using three supports along the length.

My local gym has got a steel rig made by the previous owner which is huge. The new owner is looking at getting some pullup bars fitted to it going off my advice but I'm not sure if it is going to be doable in terms of strength. Could any engineer type folk advise if it would be possible to have a pullup bar (custom made) mounted where the yellow line is in the pic attached? It would obviously require braces above and below to hold it up but I'm not sure if a combination of the two (due to the shape of the rig) will be sufficient. The bar would be 33.7mm and could be split into 4/5 sections but would need to sit at least 600mm from the rig itself.

You need a dedicated parts in a lift IG account

Thought they were the same just different axle and end caps

Looks like the days of riding at Matlock Quarry are coming to an end! https://www.derbytelegraph.co.uk/news/local-news/500-new-homes-derbyshire-town-1702604

Just stick with a 128mm

Yeah sounds like that, I've had to replace 3/4 door locks so far and used cheap copies off eBay for each. Ballache of a job but needs must

The post on the right has got a big split all the way up now so gonna replace them both with 5" posts at the end of summer. Should be solid then......hopefully

Had a change round with my pullup bar yesterday and swapped the hammerite coated steel one for a galvanised number and lowered it. So much comfier for holding and doesn't rip my hands to shreds (yet).

What make/size/style you got dude? Get a pic up!

Could also get away with MT2 or 4 running Jitsie pads

I ran deore on 200mm icetech rotors on my 4play and they held really well!

Don't think so, looks like maybe a 2011 model going off the stickers alone (so could be mistaken).

Cheers, does the job for me. Tyres are wank though so the next job is new rubber and tubeless

Yep, well worth the money in my eyes. Especially tax free!

So, I ordered this in October's cyclescheme window and didn't get it until January. Only been out a few times on it and the only additions are a Brand X Ascend dropper and some DMR V6 pedals but I love it. 120mm travel is probably a bit low for you guys but it'll do me for round here, wouldn't want to spend much more considering how often I get out!

Looking at selling my mk4 golf and going for something slightly bigger but not sure what to look for. Not got a huge budget (I reckon £2k tops) and my original idea was a van of some sort but need at least 5 seats for the family just in case. Basically I have a boot full of gym equipment (kettlebells, freestanding pull up bar, 3 sets of parallettes, etc....) and want room for all that and sticking my bike (trials and mountain) in. Current idea is Scooby Forester but wondered if anyone had any other suggestions?

Jumped on my bike at the weekend and managed a ropey 3ft sidehop and a bike length gap Not bad considering it's (literally) been gathering dust for well over a year! Right, feeling like I need to scratch my moderator itch, anyone need banning?