FINDUS

You have some very handy skills.. very good reply one more vote!!

LOL jack is a tool!!! Ash wood is ok, if not him i can help!

Is it a new wheel build?? as looking at the pic your rim is wide and the spokes are very offset. eg. normal spokes run in line with each other on both side yours are space over to the edge of the rim.. does that make sence? http://www.tartybikes.co.uk/product.php?pr...;category_id=26 drilling holes all in the center http://www.tartybikes.co.uk/product.php?pr...;category_id=25 larger size rim but notice all the spoke holes are offset

I think this post confirms the answer is no!! YOU WILL DIE

Thats cool we could meet you at burger king, saves you going all that way about newbury!

LOL..Mr zogs sex wax for all your rimming needs :$ sorry i had to say it. this stuff in the wet is horrid my mate used it on his drum sticks and spilt water on to them the stuff went all white and slippy. it also drys like hair wax after a few hours which i think would cause nightmares with the rim and pads

If you go to this ling and type in headset bearings into the search it will bring up the cane creek headset and one of them will fit!! the link is http://www.applegate.co.uk/searchadl/search.htm. I will try and find out my invoice as to what size it was might be handy for you

Im in to what time does the taxi leave mr pashley-phil??

Worst thing ever!!! I did this on my first king it was better for me to buy a new bearing than trying to fit all back together, was such hard work!

its brill at greenham trading estate, there are pallets and walls and drops its the best place in newbury im defo going

build it up!! then you can get the pics of how you had your ling running on the rear

Can be a number of things... new pads dirty rotor and i think mainly a bleed! and if your feeling clever maybe an upgrade to a braided hose i found mine improved once changed

I think somebody must be messing with you if they just disappear. the free hub body is sealed until you remove the wheel and then the free hub body. unless your hub is missing the seals and is running loose either that or the oil you use is is eating the pawls! do you find bits of metal inside the hub? I have used bulb hubs since they came out on the market for trials and for down hill and have lived to be sold on for upgrades. you need a new hope pro 2 trials hub or even better a Chris king single speed then you wont have to worry about them failing both hubs do cost a little more than most but it should be a one time buy as with other hubs they fail and need to be replaced.. hope any of my jumble helps. PS watch out for the pawl thief oh and good post thats 1 step closer to being unleashed on the forum

I use a king as i always break hope kings just work

1.04AM still not able to sleep... full of cold and flu after being out on my bike in the rain in my shorts and a tee

Why not grind it off? its faster and much more fun

Try and come to some of the rides that are setup in the ride section! where abouts you from in wiltshire?

Yep me too! maggie yellows are the way with a light rim grind

Side hops are coming along!! You should try and ride with some other trials riders, its always good to learn with somebody better than you! STAY AWAY FROM THEM SKATE RAMPS!!!

The strange part of this is i have built wheels before many times before and never had this problem. i thought a spoke in the wrong place but all were ok. its driving me mad

Hi guys need some help with the build of my wheel... hub= Chris king single speed disc 32 hole rim=halo 24 inch multi rim I am trying to build this wheel using a spoke length of 236 on both drive and non drive with a 3x spoke pattern.. My problem is it ain't working one side of the spokes are under so much tension even before i start to tighten the spokes to true. so my mission or should i say yours is to prove I'm wrong and need a different size spokes.. I'm not going to be running the disc on the wheel, both flange size are the same, plus the Axel difference to the flange from what i can work out is the same so thats how i decided on this length with the aid of a spoke calculator any help would be brill thanks in advance

Im in too!! what time you going mr ashley wood? I think phil is going later!? so i guess you going by train? let me know i will come up with you if ok!! xx

Its all about mr no way hans rey! not english but had a massive impact! but really its the martins

Hi guys i have a hope pro 2 trials rear hub its a 135 length hub. What i want to try and work out is if there is a way to change it from the 135 to 116 spacing? any info would be great thanks in advance..

A 2ND tube is a good idea this was what i used years ago, but now i use car seat belts! they are very light weight easy to fit and i have not had a puncture with them not even snake bites as you fit them right into the rim you can get them from any car scrap yard or like me from an abandoned car!