George.E

I had exactly the same problem, take out the piston, take off the o ring and sand the piston down. Lube it back up, put it back in and away you go. Mine has worked fine ever since.

My techneque is fine an I no how to sidehop.

Ok thanks guys, I think im gong to give it a go to the right an start off realy small so i can get use to it. Il see how it goes.

I learnt this way so I gess im fine.

Wack a bit of oli in the threads that should help, don't force it, you should no if its going to go in or not, mines quite tight but you can tell if its going in right. Hope this may come to some use.

Ok, I can sidehop about handle bar hight an i have been riding for around a year and 2 months. My good foot is my left foot an I sidehop with that one forward but I also sidehop to the left. Having my left foot forward and sidehoping to the left is this limiting me to how high I can go? Or is it normal to have this set up? Any advice or pointers would be greatful. Thanks. George.

I agree, just move your pads so there slighty catching the buckle but enough to slow it down an notice where the buckle is. Then adjust it, simple as. Hope that helps.

Risers, there much better an work better on mods aswel, I have flats on my Echo but im dying to get risers.

Go black mate look real smooth with white frame. Black rims with white spokes. White or silver stem. Black bars. Black tyres I have a silver Echo Lite an I have gone for a white/ blue look. Look on my profile if you want to see some pics.

I have the TR hub, real nice and smooth, haven't had any problems with it so far .

For the bb problem have you greased the axle on it ? Just a thought.

http://www.trials-forum.co.uk/wiki/Truing_a_wheel All you need to know is right there

That doesn't include me aswel haha.

Maby he doesn't have access to a computer all the time, just wait a bit. Putting this topic on here is a waist of time. If he doesn't Pm you back the he's proberly sold it.

I was going to do it myself when mine stripped but i sent it to tarty an they done a perfect job of it . It isn't to expensive with tarty either.

How do you tighten a star nut ?

Nice vid, I liked the feeling, I wish i lived there !!! that place looks realy good to ride. Well done.

I have just been out side now. Does the steerer tube where the stem clamps onto need to be realy clean ? And does the stem have to be realy tight when clamped ? Thanks.

Im goning to go and have a proper look at it in a min, iv had the headset for about 8 months so its fine. There is space between the top of the steerer and the top cap so im fine with that. The crown race is on and looks ok.

When I had only been biking about 5 months I tried just a simple drop off thye top of a set of steps only 3-4 ft high and landed but my feet slipped off and I cut my dick on the stem, it was like when you peal the top of a blister off lmao :lol: It hurt !!

Ahh nice, yee its on my profile, add me, an I go to Dinas Bran an im 15 lol

Sweet bike mate, whats it like to ride ?

Ite mate where by in Wrexham are you from ? Im from Wrexham an how old are you ?

No they have all been in for quite a while.

Baisically, I have an Onza Mongo 3 headset with Echo Lite forks. There is movement that keeps coming in my headset, my star nut is almost 1cm deep in the steerer tube and isn't near anything at the top. I often have to loosen my stem bolts an tighten the top cap because of it coming loose, I do this around 4 or 5 times a day which has to be to much. My star nut looks like its held in quite tight so Im not sure where I am going wrong. Any advise would be greatful. Thanks guys.