monkeyseemonkeydo

Does anyone know if there's a Kindle version out yet?

Must be really quite interesting though... Or am I thinking of forensic pathology?... Hmm.

Zona Zip?

They use a special mech though, don't they?

What ratios do you have to play with? I guess the best bet if you really need to go from 11-32 would be along the lines of 11-13-16-20-25-32 with 'tooth step' increasing (almost) incrementally as the sprockets get bigger. But yeah, to get from 11-32 in six steps may be asking a bit much of your chain and derraileur!

Try it and see! To be honest you may need to sack off the 32 though and run things a bit more close ratio. I think the maximum 'tooth step' you can get away with will depend on the gear in question. Going from a 29-32 will be less of a step than going from an 11-14 if you know what I mean.

You must track her to the ends of the earth, if that's what it takes, just to see her again and tell her about your dream.

It does. Particularly the damaging the wall bit of it. NBR: Nothing But Rubber

NBR.

Not to worry, have a look on Trials Central for info on mototrials

That was more at Jamie_Trials telling him to bleed with warm water just to double check. Best bet is to give the whole brake a once over, lubricating what you can and releasing pistons if they've seized. Then give it a good bleed and see where you're at.

If you can bleed it, it's NOT frozen...

Is this for the Giant? And they say the Scots are tight...

Two easy options would be to either use an inner tube or similar to shim out the existing fitting (a bit dodgy) or replace the fitting with a star fangled nut the right diameter for the bottom of the forks (less dodgy. Otherwise go for an RRP combined with a downtube mounted mudguard.

Sorry can't help, just waiting for the 'mudguards are for pussies' post...

Yeah me too! I think I had one extra semi-colon in the code but close enough

And as far as I'm aware Marino's are still put together in the guy's garage so there's no initial heat treatment process used s nothing to need to renew post-disc mount adding. Winchman- the issues usually arise with any ally frame where you get pre-treated tubes made of stuff with wall thicknesses not far off those of coke cans. Welding is difficult to begin with and it's thought (never tried it myself) that if the frame isn't heat treated afterwards, the alloy properties will mean that it will fail faster in the area which has been welded. Can't remember enough of my materials lecture materials to tell you the process behind it but I'm sure someone will!

Well if you tell us what you're currently running we can advise as to whether it is compatible or if it's too short... which it sounds like it is. In which case you'll need to get a BB with a longer axle.

Depends what axle length you have. If it's too short there's not much you can do besides buying a new BB.

If you're serious, your best bet would be to get a brake so you can offer up the caliper and make a mount to suit. Mock something up in cardboard to start with to get the dimensions and placement right, transfer to a bit of sheet steel (5mm thick would be a rough guestimate to thickness). Adding a diagonal support from opposite the front mount hole to the chainstay wouldn't hurt. Use a hole saw on a pillar drill with the tube held at the right angle to get the mating surface pretty good prior to welding. The biggest problem will be getting it aligned for welding. If it were me I'd bodge together some kind of bracket which would sit on a simple 'axle' inside the dropouts, with the mount bolted to it (in the correct place) to ensure that the mount remains perpendicular to the axle. It may also be worth tracking down someone with a disc mount facing tool too just to make it all good. What size wheels are you running? 24" or 26" I'd go for 180mm, 20" you'd get away with a 160mm. If you can get it sorted easily enough via mates etc then yeah, go for it.

So where's the update from the Bounder enhanced Tarty boys?!

What is that she keeps doing with her mouth? She's off her face on something surely? I'm sure we have some drug specialists on the forum somewhere...

YOU AIN'T BRITISH, YOU'RE BLACK! Face. Palm. Glad she's since been arrested and charged. I feel very sorry for the poor kid though...