Mr Motivator

So im running 22:18.. 22/18=1.2' 72x1.2=86.4 So my 22:18 gearing with a 72ept King actually has 86? (Y)

Amber with blue stickers; (did it in ms powerpoint (Y) )

Someone on TF I bellive.

Lol, was just thinking.. Might move to brazing :turned:

Pretty f**ked up then, oh well shit happens, best get on with life.

Didnt see it.. so what she had no nose, eyes or mouth? :turned: edit: haha what?

lol that was the first time id gass welded :turned: My arc welds are alot neater :) Yeah im considering a gassless mig again then. Found one for 1tonne so might get that :S

Thats some bad stuff miles. Make sure your tf account password isnt the same as your msn, and on that note, never did work out why u changed your name to wayne king :) edit: yeah go to msn messenger and.. contacts->save contact list :turned: they open up a new account and import the saved contact list.

Pretty easy once you got the hang of it. I actually gas welded that up there at school ^^ but run out of gas so had to use argon lol. It ends up looking like that when you arc weld anyway apart you get loads or slag :turned:

Well, as u have an alu driveshell get a CK king kog which is nice and wide or carry on using a cassett or get a stainless steel driveshell, (i can get hold of one for you at about 25quid) which would be the best bet :turned: Sam

Yeah www.migtigarc.co.uk :turned: thats the local shop i was on about :) mmmm still undecided, as long as i can get a better weld than this with a mig; lol quicky weld :S

Who cares, get an eno :turned: Tighten it and see anyway :)

Yuk, looks like a twig. Bring back the old one :turned:

For those that dont know.. Bike Spray is like GT85 and a bit like WD40, its made by muc-off and its pretty good :turned: Not as lubey as wd and doesnt evap as fast as gt, but smells a whole lot better :) I used it to flush out my king. edit: oh yeah the freewheel, ummm get an eno yeah www.bikedock.com, www.tartybikes.co.uk (i think), Dan Ko will sort you out with a 72ept eno :S

I havnt had my prom yet as its after the exams. Im going in a pink limo though :turned:

My B&Q arc welder has packed in for the final time so I need a new one. I considered a gassless mig, but after having a go with my friends im not so sure about it. So, found this at a local-ish shop; I mostly weld 2mm thick steel and so far my current welder has been ok with it, but what id like to know is, if you think that 40-150 amps is good enough, as I cant even remember what mine is (peeled the stickers off :turned: but its probably the same) OH yeah, iv been using 1.6mm electrodes and they seem fine but iv never got any different sizes.. think i should maybe go bigger? but dont really want too many holes as its only 2mm steel. Over and out, Sam Any help most obliged.

lord of the ring hole in your pants

Good show mate :turned:

Here. Sam

Kick it. Failing that, go to the control pannel and the printers and faxes, right click said printer and then go to properties, port and select the right usb.

Ride was awesome, just got back. R.I.P Deej (Y)

weather is goooood!!!!!! yES!!!!

So some u6 frames have been snapping? This is unheard of? (N)