Mr Motivator

...

...

What sort of file do you use to make a hole bigger? A paedophile. What did one paedophole say to annother on the beach? "Get out of my sun!" Heh

Sounds like some sort of cock fest for bikes lol

Look for local model shops in your area in the yellow pages. Take your car along and they should be able to find you the glow starter you need. Some are different sizes, and they might not fit in your head/heatsink so you need the right one. To tune it, you just need to use it really. Adjust the idle speed so at idle you have the throttle open about 1.5mm (when you look into the carb and see the gap) and then play about with the highspeed needle and adjust it a very small turn (like 3mm) each time. Just don't run it too lean or too rich. Is there anything else you need? I have loads of spare parts, a brand new os.15 engine, a brand new new carb, couple of exhausts, new kyosho shocks, brand new kysho alu chassis, brand new wheels and tyres. Lots of tools etc.

Haha, guy on the right. Looks like a dribley.

Was fun. Havn't been out in a while and saw some people that I havn't seen in a while! Should have stayed for the party though I expect your all partaying away right now. Sam, black toxsin

Single ply then. I've been using a 2.2 HotS for a couple of years at 15psi, they last ages, the grip is ok in the dry, they only pinch if you ride like a mong.

Yeah sweet. That was new school not so long ago Frames have come on so much in the last 2-3 years.

Meh. I've been a member of the magic circle for about 10 years. I'm pro.

I grind with the tyre on Just hold it back with one hand, have to watch your wrists though

Get it ball burnished. Yellow pages

Yeah. Get a dual ply super tacky maxxis on there. End of all problems.

Ok well if you have to take out your wheel for any reason, like a puncture, just leave the wheel on and repair the tube with the wheel still on. Or get a different mech if your that concerned?

It looks silly on a bmx, and it's not really neccasary. You shouldn't need a brake at all

Snail cams suck, get (or make if your up to it) some decent ones you can use a bolt to tighten the chain with. Local bike shop will sort you out, or alans/winstanleys bmx shop.

Rred will do, don't grind your bmx rim, please.

Yeah, just take the fun bolt all the way out on the mech side.. edit: when you put the wheel back in, sit on the frame put push it in the drop outs and tighten it as for the crushed axle end, a big chunk of mine has snapped out off my hd axle, it's ok though, but not covered by warrenty.

Is there deff a bbq and is it a bring your own pork sword affair?

I know how to mill

Billie Piper isn't fit.

Well, I'll lathe it into the general shape, drill the two big holes through it, then whack it in the cnc machine, draw it on cad again, click GO and sit back and watch it machine away some pointy bits for the sproket. I'll probably have to start the pawl seats manually on the mill, and tidy them up on the cnc

I said it was the Echo hub that had singular engaging pawls, well it was the Zoo! hub, hence why they never released it propperly I guess. However, there DOES need to be a problem, aswell as being something to do for myself this will be a college project, so I need something to say at the end what could be improved.. This is perfect you see ;P I'll still go ahead and make it. It's still just going to be pretty cool coasting with 84 clicks, even if I dont end up using it for trials, that's what the King wheel is for.

Doesn't matter that much really. I'm using spokes that are 1.5mm too long in the front. When I had a singlewall echo rim, I had to grind them down so they didnt pop through the tape and tube. It's fine.

http://www.trials-forum.co.uk/forum/index....md=si&img=14722 Betterer!