dave33

i asume that youve drilled about 4-5mm yea? get a 1mm bigger drill bit and just drill the top about 0.5mm deep and then run thetap down the hole, this should give the thread lead so it should start, the coild should have a small bit in the middle for the tool to hold which goes in first then gets snapped off to lock in place

wall thickness is from normaly 1-3mm depending on what frame really

kool pics mark that backwheel looks quite big in pic, did you attemp the wall at the back ?

14-16 pretty much the best gear going when you run the ti bash

ll secound that, dont bother with gt 85 use chain oil when fitting, finishline is nice

you will have a hard job to drill them if they are stanless steel bolts, best thing cut them with a hacksaw blade where the champs join then you should be able to grab with molgrips

ah yes the sections will be marked out with uci in mind

i dont think they will be easyer as im sure dave wants to push the uci here so us brits can do good in the worlds

if you have an old cassette take it appart and use one or two of the spacers from it to space out the bb,make sure you got enough thread in the frame though, so dont be silly and put 4 spacers in

just wonderin how often you change em or do you just wait till they snap ? also what chains are you running?

yes dave butlers gonna be runnin uci cus there isnt any other clubs in the uk thats do it

echo control 1065 rides very nice and within your budget

its got loads of street but its not ur normal kind of street, not many rails, and endlessamounts of natural. you'll see whan you get there

in that case i expect his hub will still be lose lol

try and get alec up to tom, i havnt rode much since tenby, when we spend most of the day in the pub

DO NOT PUT IN THE DISHWASHER! dont go near the seals with fairy liquid either, sounds like its leaking, return it to magura they will most probly give you a new one, you can put the rotor in the dish washer to remove the oils, you will need new pads, unless you want to bake them in the over for a while30mins normal does it

id got for a maxxis minnion front 2.35 for the rear and black lock on grips odi

like who may i ask? just to confirm iv booked the 4th and 5th off work so ll be there, martin walker should also come along to as the only local from www.trialsride.co.uk ll probly stay at his on the sat night so would be able to ride sat to if any one is staying over in abber and as for meeting place the main sea front bit is good as there is a couple of small harbours in abber as for time more like 11 would be better, as it gets dark about 5-6 so who alls gonna come ?

i get plenty of exercise pushing the peadals in my car abber doesnt have that many places to ride where the general pubic go anyway one of the main reasons its great to ride there, and loads of the people are students and dont mind watching people on bikes hoppint about

a lil shorter than the echo pures

dont think its 1mm pitch iv made my own in the past but cant remember the pitch, but it was some random half imperial/metric

yea if you lot set a date

ll come allong as its not on the weekend cus i work on them! ist 43 miles from me so im not to local either who lives the closest ?

cus the frame its self is so stiff you dont need an expensive booster, good old magura booster will do the job

175-wb +15-bb rise 375-cs 72-ha thats what id imagine id like but thats just from comparing frames iv owened and had, but it may be crap