dave33

Keep practicing

They don't have to give a warranty though because they are not selling in the uk? I always thought that the warranty was with the vendor not the manufacture ? That's why they are making the money but taking the risk. Maybe I'm total wrong though. Could you explain it ?

Better than the good old "we will have to send it back to the manufacture" I know of a few people who have got full bikes and had no problems or any extra tax. Best bit is you don't pay until you get the goods and are happy with condition etc

So did you actually snap your chain as in snap the plate or did it just come apart ?

Didn't the old monty ti come with alloy bolts in the magura 4 bolts

Have magura changed the fluid they use in the last couple of years or just the bottle http://www.chainreactioncycles.com/Mobile/MobileModels.aspx?ModelID=69 The ones on tartybikes have a different tub, is it newer thinner ?

you look better on the limey

Tomorro at 11/12 should be a few of us

fair enough, but you wont get a sprocket off a "26 wheel that i have been using, iv seen loads of people try and fail thats what i made a tool

yes a bit

but if its on tight you wont get it off the way your explaining, not without damaging the sprocket.. unless you have the right tools for the job.

yea of course, on a koxx now

if its 15t send me the wheel and i can take it off its going to cost you though

the price

the headtube is no longer a prt of the frame

You could try lacing the crossing spokes the other way to see if it moves in a different direction, people build them using 2 groups just because it's easy to drop them in from the same side. The thing your missing is that every thing with flex

Zone is the new improved brakes so surly the ones to get

basically this, your not really jumping any higher than when you start on the rear your just tucking urself up quick and pulling the bike up you need to get you arse down to the tyre for som preload, and the faster the better

Caps lines rule you don't know where he's going next

You need rubber grease, it's red in colour and doesn't corrode the seals over time

It will work fine aslong as its a mineral brake if it's ment to take dot fluid the seals will swell up after a couple of weeks

Phat fluid can make the 2012 leak

Yes they are both good rims, both hold grinds pretty well, with rockman blue pads! I found the trial tech had a few flat spots after a hammering, but not sure if that was just to many grinds

How long have you been running phat fluid ? This is a 2011 onwards brake yea ?