Cleggstar Posted July 30, 2003 Report Share Posted July 30, 2003 (edited) Add your frame and crank combos and which BB you run. Also add any other combos which you know are 100% correct! Please can everyone put down what frame they have no matter which one it is and say what setup you need. Once a new combo has been posted, it will be added to the list, and the post deleted. This keeps the thread clean, and makes it easier to find what you are looking for 26" Bikes Ashton Justice Middleburn RS7 73mm x 122mm Middleburn RS7 ISIS 73 x 118mm RaceFace Turbine Forged ISIS 73mm x 113mm RaceFace NorthShore 73mm x 110mm Base TA26 04 Middleburn RS7 ISIS 73x122.5mm Truvativ Hussefelts ISIS 73mm x 118mm Brisa B26 (Mk 1) Middleburn RS7 68mm x 113mm FSA Power Pros 68mm x 113mm BT Raven 5.0 Middleburn RS7 73mm x 128mm Crescent Ilions '02 Sugino square taper cranks (monty oem) 68mm x 113mm Curtis T1 Middleburn RS7 73mm x 122.5mm Echo ES4 Middleburn RS7 73mm x 122.5mm ECHO Urban Middleburn RS7 73mm x 122.5mm ECHO Pure Middleburn RS7 68mm x 122.5mm HandsomeDog Rockhound Middleburn RS7 68mm x 113mm FSA Power Pros 68mm x 113mm Koxx LevelBoss 1040, 1065 and 1100 RaceFace Turbine Forged ISIS 68mm x 127.5mm Middleburn RS7 or Shimano Square Taper 68mm x 118mm Front Freewheel 68mm x 127mm Koxx XTP Middleburn RS7 (16tooth bash) 68mm x 127.5mm Megamo Radical Middleburn RS7 ISIS 68mm x 118mm Monty Urban Tensiles 68mm x 118mm Middleburn RS7 68mm x 122.5mm FSA Power Pros 68mm x 118mm Onza T-Raptor Middleburn RS7 or Shimano 68mm x 11xmm??? DDG Orbita 68mm x 122.5mm Onza Armstrongs 68mm x 127.5mm Onza T-Rex Truvativ Husslefelt 68mm x 113mm Middleburn RS7 68mm x 122.5mm Orange Zero Middleburn RS7 or Shimano 113mm X 73mm Pace RC250T Raceface 128mm ISIS BB with Middleburns Pashley 26 Mhz Middleburn RS7 or Shimano 73mm x 113mm Pashley 26ghz Middleburn RS7's 73mm x 127mm Planet X Zebdi Mk4 (I think theyre all the same though) Middleburn RS7 ISIS 68mm x 118mm Saracen MAD/X-Isle Middleburn RS7 68mm x 118mm Truvativ Hussefelts 68mm x 113mm Zoo! Boa Truvativ Hussefelts 68mm x 118mm 24" Bikes There are currently no entries for 24" bikes 20" Bikes Echo Team ('05) Monty ISIS cranks (with Raceface Evolve DH BB) 68mm x 118mm Monty X- Hydra Middleburn RS7 (with Truvativ Giga Pipe DH BB) 73mm x 118mm Onza T-bird Onza Muscleman cranks with an ACS claw 68mm x 122.5mm Thanks To Me :-" Bill Tank_Rider CurtisKid Danny Dan-www.slick-trix.4t.com bucksta01274 totaltrials Janson Shooter Todge trialserguy Olly C Mr_DJ Tomm® Jobless Edited February 14, 2005 by george_seamons Quote Link to comment Share on other sites More sharing options...
Bionic Balls Posted February 18, 2005 Report Share Posted February 18, 2005 Giant trials team '03 (73mm) Truvativ Hussefelt with truvativ DH BB 73 x 118 Megamo (square) UN52 73 x 122.5 (with UCI bashring and shimano freewheel- VERY TIGHT FIT!) Onza Woodstock (73mm) Tensile (not UCI version) with FSA platinum DH 73 x 128 (uci bashring and WI trials ENO- extraction tabs ground down) Great topic! adam Quote Link to comment Share on other sites More sharing options...
rhythm_101 Posted February 25, 2005 Report Share Posted February 25, 2005 (edited) onza woodstock truvative bb 73mm x 118 onza T-rex 2004 FSA platinum pro 68/73mm x 127 all with tensiles with 22t chainring EDIT: forgot to put the cranks (Y) Edited February 25, 2005 by rhythm_101 Quote Link to comment Share on other sites More sharing options...
Janson Posted February 25, 2005 Report Share Posted February 25, 2005 Coustellier St. Blaise, Tensiles w/ ACS Freewheel, FSA Platinum Pro 73x128mm BB, frame has 68mm shell. Quote Link to comment Share on other sites More sharing options...
monkey_pork Posted February 25, 2005 Report Share Posted February 25, 2005 Onza T-Rex Base cranks (& bash:22th chainring) - 68mm x 122.5mm Quote Link to comment Share on other sites More sharing options...
Burton Posted February 26, 2005 Report Share Posted February 26, 2005 (edited) Zoo! Python '05 Tensile Cranks, 22t. FSA Platinum Pro 68/73 x 122.5mm axel Zoo! Pitbull '05 RaceFace Northshore cranks, 22T. FSA Platinum Pro 68/73 x 128mm axel Edited February 26, 2005 by dan_t-lite Quote Link to comment Share on other sites More sharing options...
Phatmike Posted March 16, 2005 Report Share Posted March 16, 2005 Right, i need to know ASAP. ZOO! '04 pitbull, ISIS middleburns, standard bash, whats the absolute shortest axle you can use? Thanks, Mike. (Y) Quote Link to comment Share on other sites More sharing options...
BONGO Posted March 17, 2005 Report Share Posted March 17, 2005 MONTY 221 X-LITE 2004 68MM X 124MM. Quote Link to comment Share on other sites More sharing options...
JT! Posted June 12, 2005 Report Share Posted June 12, 2005 Onza T-lite. I'm running tensiles with a 124mm ISIS BB but... I am 99% sure that you could run a 122mm. But definatly no shorter than this. I think that a 127.5mm BB would make the chain rub on the stay. :turned: (Y) Quote Link to comment Share on other sites More sharing options...
loffa Posted June 13, 2005 Report Share Posted June 13, 2005 BT raven 5.0 Tryall square taper ffw cranks, ACS freewheel, square taper VP 68x127.5 Quote Link to comment Share on other sites More sharing options...
spunkey_monkey_boy Posted June 18, 2005 Report Share Posted June 18, 2005 anyone know what length you need for a koxx djinn using onza musclemans? Quote Link to comment Share on other sites More sharing options...
ben_travis Posted October 17, 2005 Report Share Posted October 17, 2005 sorry spunkey i dont know what will be available for that. toxsin frame 1 - 68 x 128 (any isis cranks wiht normal bash (20/22th chainring)) 68 x 118 (tensiles wiht uci set up (16th chain ring)) should fit but probably the smallest you could go echo team 05 - 68 x 118 (with tensile uci set up 18:12 setup) thats what i know :S Quote Link to comment Share on other sites More sharing options...
nmt_oli Posted October 23, 2005 Report Share Posted October 23, 2005 Orange Zero middleburn ISIS 73x118 FSA BB Quote Link to comment Share on other sites More sharing options...
Trials mama Posted October 23, 2005 Report Share Posted October 23, 2005 hey guys, just a quick one, a bb size for a lb mod long, 18tooth eno on muscle mans ?? eddy Quote Link to comment Share on other sites More sharing options...
cookie456_the2nd Posted November 9, 2005 Report Share Posted November 9, 2005 (edited) Koxx Levelboss 26'' - DDG Orbita Cranks - Shimano UN53 68 x 127.5mm Can probably go 122. Edited April 20, 2006 by cookie456_the2nd Quote Link to comment Share on other sites More sharing options...
chrishayton Posted November 9, 2005 Report Share Posted November 9, 2005 vinco 128 68 and still tight levelboss 1065 118 68 control 05 long 128 68 all with tensiles 175 Quote Link to comment Share on other sites More sharing options...
011001000110010101110010 Posted December 27, 2005 Report Share Posted December 27, 2005 Curtis T24 73 x 127mm Quote Link to comment Share on other sites More sharing options...
Fixed Pantsâ„¢ Posted October 25, 2006 Report Share Posted October 25, 2006 (edited) WTD: Da Bomb School, mines wobbling quite alot, might need one soon and i'm not too keen on taking it out to measure it, and i dont have the tools Edited October 30, 2006 by Fat Pants Quote Link to comment Share on other sites More sharing options...
Grizzly Posted October 25, 2006 Report Share Posted October 25, 2006 Anyone know which bb you can run on an 05 T-Mag to use new style echo/zoo/andamant/czar isis cranks! Quote Link to comment Share on other sites More sharing options...
RobinJI Posted November 8, 2006 Report Share Posted November 8, 2006 RaceFace Northshore XS square taper cranks with 20tNeed a 122mm BB to clear the maggie slaves with a 38mm rim.A 122 also gives a good chain line with a Revolver SS hub and an ACS claw when using the granny ring. Quote Link to comment Share on other sites More sharing options...
Ra964 Posted November 11, 2006 Report Share Posted November 11, 2006 echo pure 2006 try-all ISIS bb 68x127.5shimano square tapper bb 68x122.5 Quote Link to comment Share on other sites More sharing options...
ogre Posted November 18, 2006 Report Share Posted November 18, 2006 Zoo! python (echo) 128mm bb- tryall with an eno and 74kingz bash (only just big enough the tabs to remove the freewheel have eaten a bit of my bb) Quote Link to comment Share on other sites More sharing options...
Andeee Posted January 18, 2008 Report Share Posted January 18, 2008 Gu typhoon 2007 26" frame? Middleburn rs7's What length b.b will fit for it? preferably something still with clearance inbetween cranks arms and stays. Quote Link to comment Share on other sites More sharing options...
Greetings Posted January 19, 2008 Report Share Posted January 19, 2008 (edited) Adamant A1 06- 128mm, Tensile UL 170mm - serious magura clearance issues with 47mm rim (cranks require grinding)- 128mm, Echo Forged 170mm - no issues- 124mm, Monty 221Ti - no issuesGU 2006 Mod-118mm, Tensile UL 170mm - no issuesZoo Python 05-128mm - too wide, chainline issues with Profile hub-118mm, Zoo CNC, Tensile UL - no issuesMonty 221Ti-128mm, Tensile UL - no issues with clearance or chainlineTriton (any model)-128mm, Tensile UL - minimum width to avoid chainstay yoke and crank clearance issues-128mm, Echo Forged 160mm - no issuesEcho Pure 04-124mm, Burns - no issues-128mm, Tensiles - no issues Edited January 19, 2008 by Inur Quote Link to comment Share on other sites More sharing options...
eskimo Posted January 27, 2008 Report Share Posted January 27, 2008 Triton (any model)-128mm, Tensile UL - minimum width to avoid chainstay yoke and crank clearance issues-128mm, Echo Forged 160mm - no issuesMine isn't euro/ threaded Good post by the way. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.