lewiswolsey2009 Posted August 17, 2009 Report Share Posted August 17, 2009 (edited) Just a bit of advice needed. My magura's are set up and work perfect minus the fact that the front one won't seem to sit in the correct place and kinda pushes itself through this only happens on one side though it then becomes weaker than what it was.they both work fine but i could do with a bit of help to eliminate the spongy feeling ???Im thinking a rim grind or tar but dont know how or what to use to do it. Edited August 17, 2009 by lewiswolsey2009 Quote Link to comment Share on other sites More sharing options...
Ben John-Hynes Posted August 17, 2009 Report Share Posted August 17, 2009 Bleed them then set them up perfectly square to the rim. WILL sort your problem. Quote Link to comment Share on other sites More sharing options...
gibbo8888 Posted August 17, 2009 Report Share Posted August 17, 2009 Have you got any boosters? Quote Link to comment Share on other sites More sharing options...
lewiswolsey2009 Posted August 17, 2009 Author Report Share Posted August 17, 2009 Have you got any boosters?Yeah But only on the back, suppose this could be the problem. Quote Link to comment Share on other sites More sharing options...
josh barker Posted August 17, 2009 Report Share Posted August 17, 2009 couple of things that i hope will work for you, bleed, boosters, set them up so they couldnt be any better (may take a bit of time but its worth it) good pads with cnc'd backings this should really help. oh and try some new plastic washes that go around your slaves. hope ive helped Quote Link to comment Share on other sites More sharing options...
Laurence--Trials Posted August 17, 2009 Report Share Posted August 17, 2009 spongy = needs a good ol' bleed. Quote Link to comment Share on other sites More sharing options...
loonytoon Posted August 17, 2009 Report Share Posted August 17, 2009 the spongy feeling will most likely be air in the brake meaning they need a bleed.as for the slipping it sounds like one of the washers around your slave cylinder has worn a bit thin causing the clamp not to pull tight to it an hold it in place properly or it could just need a bit of time spent setting it up.ben Quote Link to comment Share on other sites More sharing options...
Dale-Hill Posted August 17, 2009 Report Share Posted August 17, 2009 Sponginess = bleedSlipping thing = new washers i think Quote Link to comment Share on other sites More sharing options...
lewiswolsey2009 Posted August 18, 2009 Author Report Share Posted August 18, 2009 Cheers lads, ill have a go at setting them up differently when i get a chance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.