Mark W Posted August 8, 2004 Report Share Posted August 8, 2004 Hey, Was just thinking of semi-resurrecting the infamous "bike pics" thread, but for BMX's? Seeing as some other people have just got some BMXs (incl. me!), and I know a lot of people already have them. Go nuts! Mark. Link to comment Share on other sites More sharing options...
Brisa Posted August 8, 2004 Report Share Posted August 8, 2004 My planet x bmx hoffman forks seventies hubs, primo rim front and sun big city rear chieftan cranks and mcneil sprocket/guard fibrax pads on a super clean rim (muc off'd) amazing brake Link to comment Share on other sites More sharing options...
Ali C Posted August 8, 2004 Report Share Posted August 8, 2004 Heres mine, dont know what it is (If you know please tell me). I swapped it for a bike a couple of years ago. I am wanting to get a new one now. Link to comment Share on other sites More sharing options...
Mark W Posted August 8, 2004 Author Report Share Posted August 8, 2004 Looks like an early-ish K2 ali. Link to comment Share on other sites More sharing options...
BONGO Posted August 12, 2004 Report Share Posted August 12, 2004 (edited) fly pantera 21" frame. front end - fly malaga stem, pantera bars, dirty harry levers, clarks cables. rear end - profile LHD 10t, 36h big city rim, primo excell cranks, odyssey Jim C pedals & FBM 28t chainring. front brake - odyssey evolver with plazmatic spanish V'fly pads (same setup on the rear) i'll stick my neck out and say there isn't a better pair of bmx brakes in the world. :P pads are available from www.cleanbikes.co.uk for £16. well worth it. they MAKE the brake :) head on view hope you like :) john Edited August 12, 2004 by BONGO Link to comment Share on other sites More sharing options...
Michael Hardman Posted May 25, 2005 Report Share Posted May 25, 2005 Ok so here are the pictures of what my bike looks like now. Its just the right setup for me, just need to get used to the gear ratio, its a bit hard. Specifications Frame: Black Fit Bikes Logic frame. Fork: Black Eastern fork. Bar: Black Eastern bar. Stem: Black Eastern stem. Front Wheel: Gold, 36 hole Profile Mini SS hub with 14mm ti axle and nuts built onto a Black Sun Big City rim using Black plain guage spokes. Rear Wheel: Gold 36 hole Profile Mini SS Cssette hub with 9 tooth ti driver and 14mm ti axles and nuts built onto a Black Sun Big City rim using Black plain guage spokes. Tyres: Maxxis Hookworms with super light inner tubes. Chain Tensioner: Blackand silver Exposure chain tug. Seat Post; not sure thing its Snafu Seat Clamp : Profile Slim Jim seat clamp Seat: Cow SDG Bel Air Ti Brake: Dirt Harry lever with Black Oddessey Linear Slic Cable with Black Oddessey Evolver Calipers and Plazmatic Spanish V Fly pads. Grips: Demolition grips Headset: Chris King. (the gold one looked crap so swaped with brothers black one) Bar Ends: Profile Bar Tenders. Dust caps: Cheap ass gold bling bling form Ebay. Drivetain: Profile 170mm Racing cranks with 25 tooth Gold Profile Imperial chainring. Pedals: DMR V8 pedals 9I will change these, they are very old and wobble like Mr Blobby. Chain: KMC Kool chain Pges: Two Shadow Conspiracy Mean pegs. The bike must weigh under 30lbs it is seriously light yet remains super strong. The gear ratio is making things a lot harder but its something Ill get used to and will benefit me in many ways. The brake setupis so smooth and it locks better than my trials bike brake and it modulates damm well to. Heres the Pictures >>> Enjoy the viewing Ill carry on enjoy the ride this beast provides. Link to comment Share on other sites More sharing options...
Max Quinn Posted May 25, 2005 Report Share Posted May 25, 2005 Latest picture of my Federal division, Odyssey13T freewheel, odyssey compact 33T sprocket, Macneil seat and seat combo and heatsink V's still to come. Link to comment Share on other sites More sharing options...
matt_urban Posted May 25, 2005 Report Share Posted May 25, 2005 my beast 22inch toptube 14.5 rear end mcneil seat and post fly 3 amegos bars odassy elementry stem mcneil id forks hazard wheelset with new style 11t driver primo cranks (Y) Link to comment Share on other sites More sharing options...
Chris@Onza rider Posted May 26, 2005 Report Share Posted May 26, 2005 my haro x2 I know it sucks but i leart the basics on this (Y) Best 15 I've ever spent. Link to comment Share on other sites More sharing options...
Mark W Posted June 27, 2005 Author Report Share Posted June 27, 2005 SuperS*** Parkinson got here today from Ben Lee :) Rides really nice, change from the Shorty McShort-Short Federal. Rides really nicely on ramp, and for everything basically... The Federal was a silver frame, and it had black parts 'cos they went well. Now though I've got a black frame and it's well stealth/goth :) Got a dodgy bald Holy Roller up front ('til I put my 2.1 V-Monster back on), and a knackered (two holes in the side of the tyre covered up with plastic) Elm Street tyre on the back. Elm Street's well nice, but the Holy Roller is arse. This is Matt Hudson's WTP Thrillseeker too, just so he's got his say :( Link to comment Share on other sites More sharing options...
deagledaddy Posted July 7, 2005 Report Share Posted July 7, 2005 New bike, finally rode it today, after having it two days.... other things to do. Felt pretty sweet compared to old shed I had, loving a 21"tt. Need to se to work on the brakes and put a couple of pegs on though Link to comment Share on other sites More sharing options...
Tod Posted July 12, 2005 Report Share Posted July 12, 2005 The reason why I have'nt posted anything in a while, let alone put a leg over the trials bike... Tom Link to comment Share on other sites More sharing options...
Fishwog Posted July 25, 2005 Report Share Posted July 25, 2005 Perfect seat height ← Personal preference 'n' all....... However you like your bike is how you should ride it, don't ever let people tell you how to have your bike :turned: Anyway, may I present the reason I gave up trials.... Shadow slim seat and post on order, should be here tommorow..... and when my new card comes through I'm going to get some new cranks and pedals, so here's where i need some help.... I want a euro bottom bracket, but adapters for this USA BB frame, as I will eventually get a S+M LAF, and want to spend around £150 including the adapters, so help on that would be great. I'm also after some new pedals, some obviously grippy, SEALED, and importantly a big surface area, willing to spend around £35-40 on them..... Thank you's :D Link to comment Share on other sites More sharing options...
Jonno Posted August 3, 2005 Report Share Posted August 3, 2005 Oh well, i like it :blink: Link to comment Share on other sites More sharing options...
BONGO Posted August 19, 2005 Report Share Posted August 19, 2005 same spec as before. john Link to comment Share on other sites More sharing options...
Brian Bleech Posted August 19, 2005 Report Share Posted August 19, 2005 same spec as before. john ← ddddduuuuuuuuuuuuuudddddddddeeeee get some barbie stickers for it - be awesome :) but seriously pink white and black is an awesome combo mike Link to comment Share on other sites More sharing options...
Michael Hardman Posted August 21, 2005 Report Share Posted August 21, 2005 Here is my BMX built up with new frame, forks and bar. Only probem right now is its missing a brake as the cable snapped again and the left crank arm is wobbling, hopefully it just needs a spacer otherwise new crank time. Needs a black chainring as that one is bent to kingdom come. Do you think the bars look better in white or gloss back. Link to comment Share on other sites More sharing options...
the666ers Posted August 21, 2005 Report Share Posted August 21, 2005 My new cycle. Link to comment Share on other sites More sharing options...
butcha87 Posted August 21, 2005 Report Share Posted August 21, 2005 Nice bike 666! :ermm: How is the elementary stem?I might consider getting one. Link to comment Share on other sites More sharing options...
the666ers Posted August 21, 2005 Report Share Posted August 21, 2005 I'll post a reply once I've had the bike a while, I've only had it 3 days so far so I'll see how it goes :ermm: James Link to comment Share on other sites More sharing options...
Mark W Posted August 21, 2005 Author Report Share Posted August 21, 2005 Nice bike James, good to see it all built up :) Let me know how the Elementary goes too. I bought one before, but the steerer toob was a bit too short. Gutting! Anyway, watch out with the rear V-Monster, they're not shit hot from my experience. Wear pretty quick, and I managed to utterly f**k mine's sidewalls with relative ease. They just tear up and get scuffed grinding, and htey're pretty thin. I managed to pinch so bad hanging up on a hop->manual up a 5-set that it tore two holes in the tyre. Classy. Anyway, no new pics of mine yet. Got my new Shadow Conspiracy Lite stem on (had to knurl the bugger with a hacksaw - a.k.a. "Get a hacksaw and cut lines in it" - 'cos my Beringer bars have got waffer knurling so they slip easy). Michael - nice bike too! Are those the 2004 41Thermals? Look like they've got the older stickers on? If you want the 'new' stickers in either red, white, green or yellow (and maybe blue too?) I've got the stickersheet from mine left over, so I'm sure I could spare you some of the fancy-ass nice new stickers :ermm: P.S. James - phoned you guys up on Saturday, told someone I'd spoken to you 'bout the wheel shiz. Gotta wait 'til Wednesday (they guessed) 'til the red Hazard would be in. Had to have it in 48H which sucks, just 'cos they won't have any 36H rims in in chrome for a month or so. Link to comment Share on other sites More sharing options...
Michael Hardman Posted August 21, 2005 Report Share Posted August 21, 2005 Found bond money lying around so Micjaels buying new crnaks, profile race with ti axle to be precise for discount price hehe, will buy a cable and chainring to and Im off riding by wednesday. Link to comment Share on other sites More sharing options...
the666ers Posted August 21, 2005 Report Share Posted August 21, 2005 If you want a Ti axle for profiles the premium one is the cheapest option to go. 40quid :ermm: James Link to comment Share on other sites More sharing options...
Michael Hardman Posted August 21, 2005 Report Share Posted August 21, 2005 If you want a Ti axle for profiles the premium one is the cheapest option to go. 40quid :ermm: James ← Nope my way is hehe, £35 upgrade to ti axle genuine profile ti axle. Link to comment Share on other sites More sharing options...
deagledaddy Posted August 22, 2005 Report Share Posted August 22, 2005 James that is seriously the most shexy bike in this thread. Looks really sport on, nice to see a bike thats not balck for a change. Link to comment Share on other sites More sharing options...
Recommended Posts